Free Shipping on all orders over $300 USD
#1 Choice in Quality Dip Powder Globally. 100% Made in USA and Canada.
s

Nail Dip Process & Care

FRENCH DIP POWDER MANICURE: HOW TO

PREP NAILS

 (Wash your hands thoroughly with anti-bacterial soap)

Step 1. Use an electric nail file with a medium carbide tip or a buffer to remove dead cuticle and shine from the nail bed.

Step 2. Shape nails and shorten to the desired length.

Step 3. Apply NUGENESIS NAIL PREP LIQUID bottle (#1) to the entire surface of all 10 nails and air dry.

 

French dip powder manicure nails- Ready to dip instructions

READY TO POWDER DIP

Step 1. Apply NUGENESIS NAIL BASE GEL bottle (#2) to ¾ of the nail surface.  Apply using a back-to-forward motion to ensure the nail is evenly covered.

Step 2. Dip the nail in NUGENESIS NAIL Crystal Clear (base dip powder) and gently tap away any excess powder that remains on the nail.Tip: As needed you can use a brush to remove any excess powders.

Step 3. Apply NUGENESIS NAIL BASE GEL (#2) to the entire nail surface.  Use a back-to-forward motion to ensure the nail is evenly coated.

Step 4. Straighten the customer’s finger and place it down slightly (1/3) into the French dipping Mold filled with French powder.  Quickly and gently tap away any excess powder. Tip: Steadily control and push the Mold towards the customer’s finger to create the desired smile line. Do not let the customer control this movement.

Step 5. After step 4, quickly dip the entire nail into the Pink dip powder.  Gently tap the finger to remove excess powder.

Step 6. Apply a second coat of NUGENESIS NAIL BASE GEL bottle (#2). Repeat steps 4 & 5 to all 10 nails.

Step 7. Generously apply NUGENESIS NAIL ACTIVATOR LIQUID bottle (#3) and allow to air dry for approximately 30 seconds.

FINAL PROCESS 

(Finishing steps)

Step 1. Buff all 10 nails (using an electric nail file with a fine sand paper bit or a very fine buffer).

Step 2. Have your customer thoroughly wash & dry their hands before the next step with water only – NO SOAP.

Step 3. Generously apply NUGENESIS NAIL ACTIVATOR LIQUID bottle (#3) and allow to air dry for approximately 15-20 seconds.

Step 4. Apply a light coat of NUGENESIS NAIL FINISH GEL bottle (#4) (from left to right stroke) to all 10 nails. Then repeat using a light second coat and allow to air dry for approximately 2 minutes without touching it. TIP: Do not apply the gel using a back-to-forward motion. 

__________________________________________________________________________________________________________________________________________

Color Dip Powder Manicure Nails

COLOR DIP POWDER MANICURE: HOW TO

PREP NAILS

 (Wash your hands thoroughly with anti-bacterial soap)

Step 1. Use an electric nail file with a medium carbide tip or a buffer to remove dead cuticle and shine from the nail bed.

Step 2. Shape nails and shorten to the desired length.

Step 3. Apply NUGENESIS NAIL PREP LIQUID bottle (#1) to the entire surface of all 10 nails and air dry.

READY TO POWDER DIP

Step 1. Apply NUGENESIS NAIL BASE GEL bottle (#2) to ¾ of the nail surface.  Apply using a back-to-forward motion to ensure the nail is evenly covered.

Step 2. Dip the nail in NUGENESIS NAIL Crystal Clear (base dip powder) and gently tap away any excess powder that remains on the nail. Tip: As needed you can use a brush to remove any excess powders.

Step 3. Apply NUGENESIS NAIL BASE GEL (#2) to the entire nail surface.  Use a back-to-forward motion to ensure the nail is evenly coated. Quickly dip the entire nail into the colored dip powder. Gently tap the finger to remove excess powder.

Step 4. Repeat step 3 to all 10 nails.

Step 5. Apply NUGENESIS NAIL BASE GEL (#2) to the entire nail surface.  Use a back-to-forward motion to ensure the nail is evenly coated.

Step 6. Apply NUGENESIS NAIL ACTIVATOR LIQUID bottle (#3) to all 10 nails and allow to air dry for approximately 30 seconds.

FINAL PROCESS 

(Finishing steps)

Step 1. Buff all 10 nails (using an electric nail file with a fine sand paper bit or a very fine buffer).

Step 2. Have your customer thoroughly wash & dry their hands before the next step with water only – NO SOAP.

Step 3. Generously apply NUGENESIS NAIL ACTIVATOR LIQUID bottle (#3) and allow to air dry for approximately 15-20 seconds.

Step 4. Apply a light coat of NUGENESIS NAIL FINISH GEL bottle (#4) (from left to right stroke) to all 10 nails. Then repeat using a light second coat and allow to air dry for approximately 2 minutes without touching it. TIP: Do not apply the gel using a back-to-forward motion. 

REMINDER

At NuGenesis Nails Inc. one of our main concern is to be sanitary when using our dip products.  We always instruct and teach nail technicians when using the dip powder process to always do the following first:

1) Inspect clients hands to ensure there is no fungus or open cuts;

2) Ask client to wash their hands and use a sanitary lotion (accessible via the nail salon) before being seated;

3) Clean each nail and apply alcohol for cleanliness before applying our dip powder

Similar to applying nail polish or acrylic where the same brush is repeatedly dipped into the polish or polymer we would encourage nail technicians to maintain a high standard of sanitary procedure even when choosing this much loved alternate process/technique.  

Do you have additional questions? We'd love to hear from you. Please contact a NuGenesis Nails Master Distributor here or DM our Dip Powder Educators here.

-NuGenesis Nails Team