Details
NU 49
Mardi Gras - Nail Lacquer & Gel Combo
This product is for nail & beauty professional use only. Not for resale. Actual color may differ slightly from photos due to different monitor settings. Photos are actual nail salon or beauty spa client's nails submitted to NuGenesis Nails Inc.
To ensure quality, please be advised that NuGenesis Nails cannot warrant any purchase of our products from other than our e-store and listed distributors posted on our website. For listings, please contact www.nugenesisnails.com/pages/local-distributors or email info@nugenesisnails.com or call us at 1.888.509.5557.
Nugenesisnails.com accepts USD currency only.
Please contact us if you have any questions!
How to apply gel & lacquer:
Nail Lacquer Application
1. Thoroughly clean nails to remove any oils or residue.
2. Push back the cuticle and clean the surrounding nail plate.
3. Shape the nails with 180/240 grit nail file.
4. Apply one coat of base coat of choice.
5. Apply 2 coats of polish (let it set a minute in between application)
6. Apply one coat of topcoat of choice.
Recommended to always apply one coat of base coat, two coats of polish, and one coat of topcoat for an optimal manicure.
Gel Polish System
Gel Polish Colors cover the natural nail and also cure completely in less than 2 minutes using UV
(4x9watt) or 30 seconds using LED lamps.
Gel Polish Base/Top Gel is clear, shiny and produces a hard finish. Cures completely in less than
2 minutes using UV (4x9watt) or 30 seconds using LED lamps.
Instructions for Use:
1. Buff the nail using a white block.
1. Thoroughly clean nails to remove any oils or residue.
2. Push back the cuticle and clean the surrounding nail plate.
3. Shape the nails with 180/240 grit nail file.
4. Apply one coat of base coat of choice.
5. Apply 2 coats of polish (let it set a minute in between application)
6. Apply one coat of topcoat of choice.
Recommended to always apply one coat of base coat, two coats of polish, and one coat of topcoat for an optimal manicure.
Gel Polish System
Gel Polish Colors cover the natural nail and also cure completely in less than 2 minutes using UV
(4x9watt) or 30 seconds using LED lamps.
Gel Polish Base/Top Gel is clear, shiny and produces a hard finish. Cures completely in less than
2 minutes using UV (4x9watt) or 30 seconds using LED lamps.
Instructions for Use:
1. Buff the nail using a white block.
2. Dehydrate the nail
3. Allow to air-dry 15-30 seconds
4. Apply Base Coat using Gel Polish Base/Top Gel and cure for:
- UV Lamp (4x9watt) 2 min. or LED Lamp- 30 seconds
DO NOT WIPE THE TACKY LAYER
- UV Lamp (4x9watt) 2 min. or LED Lamp- 30 seconds
DO NOT WIPE THE TACKY LAYER
5. Apply a thin first coat of Color and cure for:
- UV Lamp (4x9watt) 3 min. or LED Lamp-30 seconds
DO NOT WIPE THE TACKY LAYER
- UV Lamp (4x9watt) 3 min. or LED Lamp-30 seconds
DO NOT WIPE THE TACKY LAYER
Note: Apply the first coat of color thinly. The color may be transparent. The second coat will cover well.
WARNING: If you see slight pulling away from the cuticle area with the first coat this is normal and will be covered by the second coat.
Note: If you see wrinkling on the nail after cure, the Gel Polish was applied too thick, apply a thinner coat. If there are curing issues in the lamp, ensure all parts of the nail have access to the bulbs.
WARNING: If you see slight pulling away from the cuticle area with the first coat this is normal and will be covered by the second coat.
Note: If you see wrinkling on the nail after cure, the Gel Polish was applied too thick, apply a thinner coat. If there are curing issues in the lamp, ensure all parts of the nail have access to the bulbs.
6) Apply a thin second coat of Color and cure for:
- UV Lamp (4x9watt) 3 min. or LED Lamp-30 seconds
DO NOT WIPE THE TACKY LAYER
- UV Lamp (4x9watt) 3 min. or LED Lamp-30 seconds
DO NOT WIPE THE TACKY LAYER
7) Apply Top Coat using Gel Polish Base/Top Gel and cure for:
-UV Lamp (4x9watt) 2 min. or LED Lamp- 30 seconds
8) Wipe tacky layer from nails using a lint free wipe soaked with EuroCleanser
To Remove:
a. Lightly buff the surface of the nail using a white block to give Acrylic Remover access to the color coat.
b. Soak a cotton swab in Acrylic Remover acetone base acrylic remover of your choice.
c. Place cotton on nail and wrap using foil to keep it in place. Check every 5 minutes.
d. Cuticle pusher can be used to help slide the product from the nail.
Note: Add more acetone to the swab if needed.
Note: Standard soak time 8-15 minutes.
Warnings/Disclaimers
Do not expose to light or excessive heat
Mix gently prior to filling
Use only as directed
-UV Lamp (4x9watt) 2 min. or LED Lamp- 30 seconds
8) Wipe tacky layer from nails using a lint free wipe soaked with EuroCleanser
To Remove:
a. Lightly buff the surface of the nail using a white block to give Acrylic Remover access to the color coat.
b. Soak a cotton swab in Acrylic Remover acetone base acrylic remover of your choice.
c. Place cotton on nail and wrap using foil to keep it in place. Check every 5 minutes.
d. Cuticle pusher can be used to help slide the product from the nail.
Note: Add more acetone to the swab if needed.
Note: Standard soak time 8-15 minutes.
Warnings/Disclaimers
Do not expose to light or excessive heat
Mix gently prior to filling
Use only as directed